Approved Products
Cleaning Procedures
Important Safety Reminders
Cleaning Procedure Guidelines
MSDS
Cleaning Schedule
Ecolab Service Report & ProceduresEcolab Posters/Signage
Home
Back to Food Safety Home
Back to SodexoNet Home

Printing Instructions
Beverage Dispenser - Recirculating Type

Recommended Products:
Preferred Cleaner:
Solitaire

Alternate Cleaner:
Oasis 133 All Purpose Cleaner

Preferred Sanitizers:
Oasis 146
Mikroklene

Frequency:
Daily

Procedure:

  1. Remove drip tray and wash, rinse and sanitize in pot sink.
  2. Wipe down dispenser with solution of Solitaire using a spray bottle and clean cloth.
  3. Rinse with a clean cloth.

Frequency:
Weekly

Procedure:

  1. Remove product from dispenser, place in clean, sanitized containers, label and refrigerate.
  2. Remove the push handle by pushing handle back until it stops. Grasp clips on handle. Squeeze clips until they are free from panel. Pull straight down on handle.
  3. Disassemble the bowl, lid, gasket and pump housing assembly. To remove pump housing, push back on top of housing just below spray tube, and lift up and out of bowl.
  4. Wash, rinse and sanitize all parts in pot sink. Note: Abrasives will scratch plastic parts. Do not put parts into dishmachine.
  5. Allow to air dry.
  6. Reassemble dispenser.
© Copyright Ecolab Information