Approved Products
Cleaning Procedures
Important Safety Reminders
Cleaning Procedure Guidelines
MSDS
Cleaning Schedule
Ecolab Service Report & ProceduresEcolab Posters/Signage
Home
Back to Food Safety Home
Back to SodexoNet Home

Printing Instructions
Hood

Recommended Products:
Preferred Cleaner:
Greasecutter Plus

Frequency:
Weekly or as needed

Procedure:

  1. Remove all filters and wash in the dishwasher. Caution: If filters are heavily soiled, avoid
    washing them all at the same time. The dishwasher will clog with excess grease.
  2. Spray all inside and outside surfaces with full strength solution of Greasecutter Plus.
  3. Wipe down all surfaces with a clean cloth.
  4. Rinse with a clean cloth.
  5. Allow surfaces to air dry.
    Note: For open hoods, empty the grease cap located at bottom lower corners of hood filters.

Safety Tips:

  1. Wear rubber gloves, long-sleeved garments and splash-proof chemical goggles.
  2. Use a stable ladder.
  3. Make sure all food has been removed to avoid contamination.
© Copyright Ecolab Information